2- ioWave Wireless T4/E4 ioLink 4 port T1/E1 AC

This is a lot of 2 ioWave Wireless Networking T4/E4

4 port T1 / E1 Wireless

Model # ioLink 4 AC

These are both in good Condition, Pulled from a working enviroment.

I powered these on and went through the menus.

That is all the further that I can test them.

30 Day warranty.

Let me know if you have any questions. M-F 9:00-5:00 PST (503) 391-8191 x 118 Robin

Supports 4 user T1 or E1 connections

Compatible with ioWave?s ioLink 1 2.4 and 5.7 GHz RF Units

RF Unit Compatibility ioLink 1 2.4 GHz RF Unit (RSSI only and RSSI** / DTMF versions)

ioLink 1 5.7 GHz RF Unit (RSSI / DTMF)

Interfaces DSX or G.703, software selectable

Data Rates DSX ? 4x T1 @ 1.544 Mbps each

Forward Error Correction Convolutional codes (DSX and G.703) 3-bit soft decision Viterbi decoding

Channel Bandwidth 20 MHz

Modulation DQPSK

Spreading Method Direct Sequence

Spreading Codes 12-chip orthogonal Walsh Hadamard

Processing Gain > 10 dB

Receiver Sensitivity 2.4 GHz BER 10-6

4x T1 -86 dBm

4x E1 -85 dBm

5.7 GHz BER 10-6

4x T1 -83 dBm

4x E1 -82 dBm

Front Panel Power and Alarm LEDs Keypad LCD Display

Monitor/Control Local via keypad

Remote via RS232, SNMP-compliant agent, PPP Protocol

Hot standby relay (four contact sets)

Far end monitor/control using RF orderwire

Accessible via front panel or SNMP agent

Designed to operate reliably even under marginal link conditions

Power Connector EIA, 3 contact, Male

Power Worldwide 90 to 240 VAC, 50/60 Hz, internally fused

Power Consumption 20 Watts max (not including RF unit power)

Operational Temperature 0? C to +60? C

Dimensions (WxHxD) 17? x 3.5? x 13? (19? rack mount, 2 unit height)

Here is a link to more info :

http://www.alpha-omegacom.com/brochures/io4SS.pdf